Automatic Digital Tyre Inflator Built-in Printer and Multi-head inflator for 4 Tyres Simultaneous Inflation (Indoor)
E-010-4L-PR (Standard Model, With Printer)
E-010-4L(Customized Model, No Printer)
Main Feature:
■ Print the “Before Inflate” and “After Inflate” pressure for each individual tyre respectively ■ Set and inflate different pressure for front and rear tyres simultaneously** ■ Individual tyre pressure readout from the four display screens ■ Converts up to 4 tyres to Nitrogen simultaneously at the touch of a button** ■ Fully automated, fully programmable, micro-processor controlled conversion system ■ Suit for: Car, Light Truck, Bus
Inquiry
| Dimensions (Height*Width*Depth) | 280mm*275mm*175mm
11"*10.8"*6.9" |
| Net Weight | 13kg/28.6lbs |
| Gross Weight | 14kg/30.8lbs |
| Packing Size (Height*Width*Depth) | 230mm*320mm*610mm
9"*12.6"*24" |
| Power Requirement | 100Vac/240Vac 50/60HZ |
| Power Consumption | 40VA |
| Operating Temperature Range | -20°C/-4°F to 70°C/158°F |
| Max Inlet Compressed Air Supply | 217PSI/15bar/1500kPa |
| Maximum Operating Pressure | 145PSI/10.0bar/1000kPa |
| Minimum Operating Pressure | 5PSI/0.3bar/35kPa |
| Over Pressure Setting Range | 0-29PSI/0-2.0bar/0-200kPa |
| Nitrogen Purges | 0-9 |
| Inflator Accuracy | ±1PSI/0.07bar/7kPa |
| Resolution | 1PSI/0.1bar/5kPa |
| Units of Measurement | PSI/bar/kPa |
1. Auto-start inflation
2. Automatic zero drift adjustment
3. Remain at last setting
4. Audible and visual end of the cycle signal indicators
5. Self-diagnostic features
6. Vandal resistant mechanical switches
7. Large backlight LCD display
8. 4 Nos.*10M/32.8ft standard hoses with single clip-on chuck
9. Comprehensive diagnostics and error reporting
10. Nitrogen purge and fill cycle (N2P)
11. Adjustable over pressure setting (OPS)
12. Adjustable number of cycles
13. Adjustable lower purge pressure limit
14. 4 air outlets allow simultaneous inflation of up to 4 tyres
