AA4C Portable Movable 3D Wheel Alignment For Both Car & Truck 3 Camera Technology

AA4C Portable movable 3D wheel alignment for both car & truck 3 camera technology

Introduction:

1.Use three cameras technology to measure.

2.Can measure passenger car, light truck, heavy truck, trailer and bus.

3.Use special calibration technology. Distance from center camera to the ground is only 10cm, which realize the real-time measurement near the targets, enhance the target’s definition and also increase the measurement stability and accuracy. Do not affect left and right camera column’s communication, solve the traditional measurement trouble that has to measure far away the vehicle.

4.Use unique technology to solve light interference problem when measure outdoors. Outdoor real-time measurement can be realized.

5.Can lock the camera and target coordinate system function, so operator can move camera stand columns or targets based on working place situation during measurement, do not affect measurement data.

6.High precise plane algorithm of vehicle body can solve the measurement problem when the measured vehicle is on the cambered road.

7.Camera column height is only 68cm, light with small volume that can hang on the mobile service vehicle easily, do not need trolley and cabinet.

8.Model Y 7’’ screens on the camera column can display equipment working situation, network situation and measurement data, also can assist after-sale service person to check and solve problems through remote-controlled way.

9.Camera and computer can work through battery, working time is 8 hours, equipped with model W wireless screens, which solve the power supply trouble when work outdoors.

10.Multi-angle LED light board design can make sure the target’s reflection is enough whatever the distance from camera to the targets is far or near, make sure the camera’s recognition do not have tolerance due to distance and sunlight interference.

11.Operator can select to start to measure from the front of the vehicle or the back of the vehicle based on working place and vehicle situation.

12.Our aligner can make real-time measurement and adjustment for double directions truck at a time. Measurement data is accurate and stable.

13.Pointer targets: pointer targets can calculate vehicle’s geometric center line position accurately.

14.Measurement mode: static measurements, dynamic measurements.

15.Three point clamps do not need rim compensation.